Category: H2 Series

(Results from 21 to 23)
Can the CS210/H2101 lockset be ordered less outside lever?
This locksets outside lever is attached to the lock chassis. There is no way to build this lockset less the outside or inside levers....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H2 Series
With the S200 series discontinued, what additional prep is needed for the CS200 or H2 series lockset?
On the S200 series the deadbolt bore hole is 1-½". On the CS200/H2 series, the bore for the deadbolt is 2-1/8", requiring additional door prep.  Also verify the latch faceplate requirements...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H2 Series
Are Falcon locks available with split finishes?
Falcon allows split finishes on all lock series.  ...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series (Falcon) | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series (Falcon) | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H2 Series | Schlage Commercial » Mechanical Locks » Cylindrical » TM Series

Support by product