Category: Isonas

(Results from 11 to 20)
ISONAS RC03 - Dry Contact Relay
RC03 has a built-in SPDT relay which can be set for wet (powered) or dry output. To set unit for dry contact: Remove jumpers from JP2 Use wires as follows: Pink - Common ...
Schlage Commercial » Software » Isonas
ISONAS RC03-to-RC04 Cable - Using the CABLE-Adapter Cable
At the reader end, the adapter plugs in between the RC04 reader and RC03 cable. Then the wiring at lock end needs to be changed for RC04 output colors.  Many wires can no longer be use...
Schlage Commercial » Software » Isonas
How to lockdown a specific access point in Pure Access?
You can lockdown a specific access point in Pure Access by sending a ‘Lockdown’ Command, using a Single Access Point Widget, using a Multi-Access Point Widget, using a Lockdown Widget or by creati...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Manager | Schlage Commercial » Software » Isonas » Pure Access Cloud
Getting compile failed on Isonas Pure Access Cloud.
2 things to check. Make sure the firmware is up to date on your devices. Also run a user report making sure no one has a credential with a 0 value. ...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Manager | Schlage Commercial » Software » Isonas » Pure Access Cloud
Trying to update the firmware in IPBridge, getting error: Update coprocessor 2 error.
The IP-Bridge 1.19/1.03 coprocessor firmware (1.03) can be difficult to install. If your IP-Bridge is already at coprocessor version 1.03 it is strongly recommended that you do not attempt to reinstal...
Schlage Commercial » Software » Isonas | Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK)
Is the pigtail the same for the Isonas RC-02 and the RC-03 readers?
Yes, they use the same pigtail. ...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Manager | Schlage Commercial » Software » Isonas » Pure Access Cloud
If you setup ADSync, and manually add secondary badges to users in Pure Access Cloud, will ADSync deactivate these credentials?
IF ADConnect is configured to sync credential information: PureAccess will deactivate credentials that are manually added when ADConnect performs a sync operation.   ...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Cloud
Isonas RC-03 Readers - Enabling Wiegand Interface Module (WIM)
To enable WIM on an RC03, first ensure it is properly installed by following page 31 of the RC-03 Manual: Download RC-03 Manual Then use ReaderTester Tool (from DBCrystal Software Package) or Re...
Schlage Commercial » Software » Isonas | Schlage Commercial » Readers » IP Based
Will my unlock schedule work with RC-04 if I lose internet?
Yes, it will still unlock.  The unlock schedule is kept at the lock level....
Schlage Commercial » Software » Isonas
How can I delete a user in Pure Access Cloud?
In Pure Access Cloud and Zentra, users may only be deactivated, not deleted.To deactivate a user:Go to the users list of Pure Access or ZentraClick the three dots to the far right of the user’s name...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Manager | Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Zentra

Support by product