Category: IPBridge

(Results from 31 to 38)
On an IP-Bridge, what type of wiring is recommended for Input and Output Connections?
Recommendations:(Note all wires should be shielded, twisted-pair to prevent crosstalk and EMI)Note:18 AWG or larger if Using DC power connector.Recommend 22 AWG for reader wiring, up to 250 ft.  ...
Schlage Commercial » Software » Isonas » IPBridge
My Isonas device (RC03, RC04, IP Bridge) is showing as not connected in my Pure Access Cloud tenant.
Disconnected readers will continue to function in an offline state so long as they are powered up.  Their function will be based upon the information in the last compile that they completed while...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » RC-03 | Schlage Commercial » Software » Isonas » IPBridge
How do you update firmware on an MTB reader integrated with an IP Bridge in Zentra?
In the Zentra mobile app, in the "Devices" menu, pair to the device that the MTB is commissioned to.The MTB s/n and firmware level will be displayed; as well as the MAC address for the IP Bridge it wa...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Software » Isonas » IPBridge | Schlage Commercial » Software » Zentra
What can be connected to the “Downstream” ethernet terminal on IP Bridge?
Isonas IP-Bridge – What can be connected to the “Downstream” ethernet terminal?          i.      The “Downstream” t...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » IPBridge
Where to connect the shield wire for the IPBridge.
When connecting a shielded wire between a Wiegand reader and the IP Bridge, where is the shield wire connected?           When running a shielded cable, the shield wire m...
Schlage Commercial » Software » Isonas » IPBridge
Is there a character limit on the length of a Pure Access Cloud access point name?
For Schlage devices like an RC, an access point name must be between 1 and 20 characters (including spaces).The same limit is not applicable to Isonas devices like RC03, RC04 and IPBridge, which can h...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » RC-03 | Schlage Commercial » Software » Isonas » IPBridge | Schlage Commercial » Software » Isonas » RC Reader Controller
What are TTL outputs used for on IP Bridge?
These are not currently used for any applications...
Schlage Commercial » Software » Isonas » IPBridge
What does dry and wet mean for IP Bridge relay output?
The Bridge is configured as dry out of the box since no power is provided. For powered (wet) purposes DC can be jumped to COM for power between GND and NC or NO. ...
Schlage Commercial » Software » Isonas » IPBridge

Support by product