Category: HL6 9000

(Results from 1 to 10)
What lock monitoring options are available with the Schlage HL6-9000 series locks?
The RX (Request to Exit) is the only available lock monitoring option available for the HL6 9000 series. The available functions available with the RX option with the HL6-9000 are: The HL6 9092 E...
Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
What are the engraving options for the HL6/PL7/PL8 tubular, and HL6-9000 mortise locks?
Please click here for the HL series catalog and go to page 11 for the engraving options....
Schlage Commercial | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
Is the HL6-9000 bent tab strike offered as separate item?
...
Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
What parts are supplied with the HL6-9000RK?
The Schlage HL6-9000 locks have two trim pack options: HL6-9000RK and ** HL6-9000RK-95 **.These trim packs come with mortise paddle assemblies, covers and parts needed to install; parts included in th...
Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
Can you order HL6-9000 Pull and Push paddles only in 630 AM?
The HL6 9000 Push and Pull paddles only can be ordered in 630 AM, see below for part numbers. Handle.10593= HL6 9000 Push handle only 630 AM (US32D-AM) Handle.10594= HL6 9000 Pull handl...
Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
When was the HL6 rebranded as Schlage?
In November 2016, the HL6 was rebranded from Glynn Johnson to Schlage. ...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
Is there an offset between the Center Line of the Strike and the Lock on an HL6-9000?
The Strike Center Line is located 3/8" or 10 mm above the Lock Center Line.  Please click here for a link to the Installation Instructions; reference step 2a.   ...
Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
Is the HL6-9000 ligature resistant?
No,  HL6-9000 are not ligature resistant. ...
Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
Is the HL6 or HL6-9000 available for non-standard door thicknesses?
The HL6 and HL6-9000 are available for 1 3/4" door thickness only....
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
Are the HL6-9000 paddles ligature resistant compliant?
However, Schlage makes ligature resistant lever (SL1) and knob (SK1) kits that can be used in place of the HL6 push/pulls on the HL6-9000 mortise locks.When converting an HL6-9000 to have ligature tri...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000

Support by product