Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does the AD and CO series lock use the same latches as the ND locks?

Resolution: The AD/CO series locks do not use the same latches as the ND locks.:

How do I enroll i-buttons into the CT5000 without using Schlage Express and the HHD

Resolution: Devices needed : SRT-100 i-button reader and MTK15 reader · You will need to connect the SRT-100 i- button reader and the MTK15 reader (conf...:

I forgot my toggle code that was programmed into my CO lock, door is in open state.

Resolution: · If you know your program code you can create a new toggle code to be used to relock your unit. · ...:

What is the correct part number for a AD/CO lock with a JDYA7 cylinder

Resolution: Price book shows for the AD/CO locks- part number 23929722 for CY and MS Ad service manual shows the same Co service manual shows – CY- 2...:

Will I be able to program the AD-201 with SMS Express and MT20 enrollment reader.

Resolution: Yes , you will need a configuration card to flash the MT20 reader to be able to enroll cards into express – part # CE-401-061:

A newly installed MTMSK15 will accept PIN codes on the Keypad but will not read card swipes. Cards are encoded on track 2.

Resolution: The MTMSK15 is shipped with out the Mag Swipe Reader connected. There &n...:

Does a Red Programming Fob need to be registered in Express to allow programming of PED's?

Resolution: No - the Red Programming fob must be synced to the PED first to allow ...:

Can lithium batteries be used in any AD or CO series locks?

Resolution: No - alkaline batteries only. Lithium batteries provide too much voltage and can damage the PCB board.:

Does the HK2-CR have an option for selecting Card or Lock Output?

Resolution: No - the HK2-CR is Card Output only.:

What is the minimum door size that the 692 Smart bar can install on?

Resolution: 26 inches is the minimum door width that the current 692 Smart Bar can be cut down to.: