Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does StratIS Multifamily Program support CO200 and CT5000 set up?

Resolution: Yes, the StratIS tablet has a cable option for USB connection.:

What is the Part Number for a Mounting Block for BE367 lock?

Resolution: There are (2) available Part Numbers, 44105 and 44161.:

What is the communication range of NDE Gateway (GWE) to devices?

Resolution: In typical building environments, up to 30’ line of sight to door can be achieved with the 2.4GHz Bluetooth Low Energy. A site survey is required to identify items that may impact communication ran...:

Schlage Express and HandNet for Windows - Where to Register the Software

Resolution: To register either software go to: ...:

What is the range of Remote Lockdown Fobs for the C0220

Resolution: · up to 75 feet on secured side · up to 25 feet on exterior side of door based upon typical ...:

What template do I use for the NDE locks?

Resolution: You can go to our Allegion site for all your template needs. Click here to go the Templates page. :

What is the maximum pin length for 8 bit burst using an MTK-15 reader?

Resolution: There is no maximum pin length as far as the reader is concerned. This will be set by the access control system.:

What is the size of the Hex head arm screw (that holds the rod and shoe in the forearm) for the 1250 or 1450 regular arm closer?

Resolution: The hex head would require the use of a 10 mm wrench or you can use an adjustable wrench (crescent wrench) as noted in instruction sheet.This hex head arm screw is not an orderable item.:

Is there a keypad membrane such as part #44487247 for a CO-Series lock for the AD-Series with a KP module?

Resolution: No. Since the keypad module on an AD-Series lock cannot be disassembled, the membrane cannot be replaced.:

What is the thread size for the NDE-80 mounting screw?

Resolution: The NDE80 / NDEB mounting screws have a #10-32 thread. :