Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can 98/9947WDC be used with Schlage AD993 trim?

Resolution: No.AD993 trim, when used with CVC or CVR devices by Von Duprin, are for metal doors only.:

Resolution: For history of Door Closers and LCN see the general section of the LCN catalog, which can be found at the following link.http://us.allegion.com/content/dam/allegion-us-2/web-documents-2/Catalo...:

What do the switches monitor on the E7500 and SS7500

Resolution: One switch monitors the state of the solenoid. I.E. whether lever is in the locked or unlocked state. The other switch monitors the state of the deadlatch/aux latch.:

What do the switches on the E7500 and SS7500 monitor

Resolution: One switch monitors the state of the deadlatch/Aux latch.The other switch monitors the state of the solenoid. I.E. whether the trim lever is locked or unlocked. :

Is the Falcon 25-M exit device handed and reversible?

Resolution: The Falcon 25M is handed and should be ordered with the proper door handing. If necessary, the device can be re-handed by installing the appropriate center case slide bar assembly which...:

Is this combination valid: RX99L-F with an E996L trim?

Resolution: Yes, that is a valid combination.:

What does MD describe? Example: My customer has this listed as RX99L-F E996L 06 FS 4' MD US26D?

Resolution: In this example, MD stands for Metal Door.:

What is the part number for the torsion springs for 6111

Resolution: Kit # 050942-00 kit includes 972328-00 Torsion spring in the kit.:

When cutting or downsizing the 705 continuous hinge, do I cut from the top or bottom?

Resolution: Cut from bottom up.:

What mullion can be provided that will work with the exit device backset used on single door mounting?

Resolution: Mullions are for double doors. There is not a single door prep for mullions.: