Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

When installing a Schlage FSIC in a Falcon T lock what is the orientation of the tailpiece?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The tailpiece orientation for the Schlage FSIC is horizontal (perpendicular to keyway) when use...:

Can escutcheon trim be added to an MA lock originally ordered with rose trim?

Resolution: You must replace the complete lever and escutcheon trim as the mounting plates and bushing are different between rose and escutcheon.:

Did the dimensions on the mounting posts on a 20 year old 22 series device change from what we offer today?

Resolution: No. The mounting posts of a 22 have never changed. :

Will the RX switch from a Von Duprin 99 series work with a Falcon 25 series?

Resolution: The RX switches from Von Duprin (050251) will not work with Falcon exit devices(650359) and vise versa. :

Can the 237L be ordered for a 10' tall door?

Resolution: This can only be done as an engineering specials.See the front of the Von Duprin price book for information on engineering specials.:

Are the 996L escutcheons sold seperately?

Resolution: No, they have to be ordered with a complete trim. :

Is the bolt on the Ives FB41T and or FB41B adjustable? If so, how is this accomplished?

Resolution: The bolt can be adjusted up to 7/8" by turning the threaded bolt housing into the body. It can be adjusted so that the bolt is flush with the top of the door when in the retracted state. ...:

Does Falcon offer a pullman or ES top latch for the Dor-a-matic 1490?

Resolution: The SU latch for the 1490 and the 1690 are the same. :

Can the electrified ND lock be used in an outside application?

Resolution: Not recommended for outdoor installations.:

Will a Schlage FSIC fit into a KS series padlock with conventional cylinder prep?

Resolution: While the KNK prep does have a figure 8 pattern (a shroud surrounds the bible of the cylinder), it is not compatible with Schlage full size interchangeable core. :