Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
886
887
888
889
890
»
Question
Answer
Is there a radius corner strike for the commercial B series deadbolts?
Resolution:
See below for list of radius corner strikes for the Schlage B series deadbolts. B250 Series - 10-004 B500 Series - 10-092, 10-103, 10-104 B600/700/800 Series - 10-092-10-...:
What is the ID number starting with F that is stamped on Falcon keys?
Resolution:
Beginning in 2021, Falcon keys in restricted key sections are stamped with the end user restricted product account number just like Schlage restricted key section keys. The Falcon...:
Does the 510L-DT have a lift finger?
Resolution:
The 510L-DT Trim is a dummy trim with no moving parts. :
Can a non-fire rated QEL 99 be converted to have dogging?
Resolution:
Non fire QEL 99 can be converted to hex dogging by using hex dogging kit, 050709 and hex dogging cover plate 050114. :
Can a bottom latch and cable assembly be added to an existing AX 9850 WDC LBL?
Resolution:
It would still work. However, the device would take more force to release bottom latch so no longer "AX" approved. :
Can the keys and or lock cylinder on a SB1630 be replaced?
Resolution:
There are 4 different key codes we offer. 1289 is default if not specified. :
What material are anchors for fire rated mullions?
Resolution:
The instructions for the 9954 confirm iron expansion anchors. :
Is the 1260-146 the same as the 1460-146 shaft cover?
Resolution:
The 1260 and 1460 shaft cover is the same. :
Does the 55-EO rim device have the parts necessary to receive a rim cylinder?
Resolution:
The 55-EO device does not have the parts needed to receive a rim cylinder. It must be retrofitted using the 55CK-NL conversion kit which is Part 050105.:
Is it possible to electrify an existing 4954 Von Duprin mullion?
Resolution:
Existing Von Duprin 4954 mullion can be electrified. The conversion requires the KR54-F Retrofit Kit (Part 050169), the Female Wire Assembly (Part 105988), and the Male Wire Assembly (Part 10...:
«
886
887
888
889
890
»