Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can I add a device to more than one device group in Engage?

Resolution: With the Engage application, you cannot add a device to more than one device group.:

Do you make or offer a longer electrical cord connecting the front to back of Schlage LEBMB lockset?

Resolution: For the LEB locks, we only have one length.We do not make or offer longer cables for the LEBMB locks. If you make any modifications to the lock or wires, it will void the warranty.:

Can I pull reports in Engage for who has which key assigned to them?

Resolution: The only reports you can run are the options in the audits tab.Unfortunately there is no option to pull report with that info with the free Engage software. :

Can I receive an automatic email alert for any low battery on any NDEB lock?

Resolution: Unfortunately there is no option for email alerts for low battery on the NDEB locks using the Engage software.You can see the battery level of the locks when you SYNC to the door to pull in the aud...:

Can I disable the electronics on an NDEB?

Resolution: If you do not want to use the electronics card reader on the locks, you can turn off all of the technologies the card reader is looking to read.Just click all of the options OFF and save.If you wis...:

What Input option should be used for 'buzz-in' component on CTE?

Resolution: On the CTE controller, use the REL (for release) as the input termination for the intercom or ‘buzz-in’ component. :

Does LCN offer an Operator with an extended long spindle?

Resolution: LCN does not offer an extended spindle option for our Operators. The only exception is a special application with the pneumatic 2610 operator X ST-1885, which uses a longer spindle to attach ...:

Does the PRX-2 card come with a preset facility code or would it be chosen like the current Prox cards from 0 - 255?

Resolution: The PRX-2 cards would be programmed with a preset facility code and badge ID from the factory.:

Does the AD300-993 dummy trim does require a core?

Resolution: The AD300-993 dummy trim does require a core, it is used to keep the lever from being removed.:

Where is the manufacturing date stamped on the 4040SE track?

Resolution: There is a date of manufacture stamp (sticker) on the inside of the track.: