Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Extra Long Arm:

Resolution: Extra Protection:

Can the Gen2 indicator be ordered with an electrified L9000 mortise lock?

Resolution: Non-Deadbolt functions: (L/LV9090, L/LV9091, L/LV9092, L/LV9093, L/LV9094, L/LV9095) not allowed due to these locks not having a turn hub. Deadbolt functions: (L/LV9492, L/LV9493, L/LV9494, L...:

Can I order a 5-pin Schlage Full Size Interchangeable Core?

Resolution: Schlage Full Size Interchangeable Cores (FSIC) can be ordered 5-pin.Supplied as a 6-pin core with only 5 chambers pinnedOnly available in Non-Primus Obverse (i.e. "C") keyways Specify pinningT...:

What is the projection of the Auxiliary Fire Latch (AFL)

Resolution: The full length of the latch is 1.600". (Can be found on Von Duprin drawing 71286).The thickness of the fire latch housing faceplate is 0.060. (Can be found on Von Duprin dr...:

Schlage Express error "Error 3219 Operation is not allowed in this context”

Resolution: This error can come up if you have a corrupt file in the sync folder. Try to make a backup and clear out the sync folder and try again.:

How does the LX switch operate with cable devices 9849 / 9949 / 3349 / 3549?

Resolution: #1. The LX switch monitors the trim input. In other words, the LX switch will change states (open or close) momentarily when the lever is stroked. #2. The LX switch will monitor the latch...:

Why won’t my AD200 work with the remote release feature?

Resolution: · You must have a PCB with revision “F” or higher. · Be sure to properly wire to the normally open and common of the switch ...:

Will the current 8200 series console add on switches fit the older Locknetics version?

Resolution: Yes, the 8200MS and AS switches are compatible. The new consoles are the same as the older ones so they will fit.:

Can AD200 or CO200 locks be programmed with a two man rule?

Resolution: No they cannot. There would need to be two separate users with their own credentials to gain access. In standalone mode or with Schlage Express Software this is not possible to program.: