Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Are latches for HL6, PL7, PL8 available sold separately?

Resolution: HLPART.10060HL6/PL7/PL8 US3 LATCHBOLT PKG 2 3/4 BS.605HLPART.10061HL6/PL7/PL8 US4 LATCHBOLT PKG 2 3/4 BS.606HLPART.10062HL6/PL7/PL8 US10 LATCHBOLT PKG 2 3/4 BS.612HLPART.10063HL6/PL7/PL8 US10B LATC...:

How is the RX switch handed on the L9010?

Resolution: The RX switch doesn't require handing as there is not a handing screw on the L9010 lock body. The RX switch will trigger both the outside lever and the inside lever. :

What components are different between an L9000 and the LV9000 Vandlgard option?

Resolution: Vandlgard components inside the lock case are different. All other components are the same with the exception of the Mounting Posts/Ferrules and functions requiring springcages instead of spa...:

How to determine the handing of the L9000 one-hole strikes for latching functions?

Resolution: The XL11-820 & 10-145 is a one hole strike for latching functions, RH and LHR doors. The XL11-821 & 10-144 is a one hole strike for latching functions, LH and RHR. &nbs...:

Is the tailpiece the same for the ND series and the NDe series?

Resolution: The ND and the NDe tailpieces are the same since early 2017. The part numbers for the tailpiece options are shown below:DESCRIPTIONSUFFIXTAILPIECE/ KIT P/NDRIVER, SCHLAGE KIK/STANDARD PDN523-0...:

Did Falcon make a change to the SFIC cores?

Resolution: Falcon changed the design of the 6 and 7-pin SFIC cores in December, 2017. The cores now have a brass shell with a clip to secure the plug to the shell.:

What cylinder operates the 212L trim used for the Falcon 20?

Resolution: The 212L or 212-NL Escutcheon trim uses 1-1/4” mortise cylinder, with a straight cam (comparable to Falcon #5, or # 4 cam). :

Is the H2 lock available for purchase in 622 finish?

Resolution: The 622 finish is available on the Falcon H2 series locks.:

Is the Falcon H2 adjustable for either a 5 1/2" or 4" door prep?

Resolution: The Falcon H2 fits 4” or 5 1/2” (factory default) center to center door preps.:

What is the driver part number for the Schlage FSIC when used in the CO-100 CY?

Resolution: The CO series FSIC driver (23446339) has an overall length of 0.985":