Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What do I need to order to convert a KR4954 to KR4854 mullion?

Resolution: The KR4954 has the same mullion body and most of the same KR kit parts as a KR4854 mullion. However, the KR4854 uses the fire rated (9854/9954) top fitting components. So these top fitt...:

What is the Schlage or Falcon equivalent to the Corbin Russwin A02 cam?

Resolution: The Corbin Russwin A02 cam is the same as the BEST 30 Latch function cam or the Schlage and Falcon straight cams.:

What is the amp draw on the black and white wires on the P6 or P7 activation cables on the Sr Swing operator?

Resolution: On the STD Sr Swing control box (shipped Dec. 8th, 2019 or before) label on control box will have 710164-00 - 24vac (STD) - draw is 1.5 A On the HD Sr S...:

What mounting posts are used with SL1 x SK1 trim?

Resolution: When SL1 (lever) or SK1(knob) trim are specified with a lock, the mounting post (ferrule) supplied depends on which (knob or lever) is on the outside.Knob outside, lever inside: (2) L583-212 mounti...:

Can you convert a 360L to an E360L?

Resolution: No, the electric components may not be field-added to a mechanical trim. A new E360L-BE control must be ordered from the factory.:

Are the drive in latches used the "A" and "AL" series UL listed?

Resolution: The Drive in latches 11-110, 11-113, 11-104, and 11-105 used on the "A" and "AL" will NOT be UL listed. :

What strike is required for the Von Duprin 98/9927F LBR device?

Resolution: What strike is required for the Von Duprin 98/9927F LBR device?The 499F strike is required when using the Von Duprin 98/9927F LBR device. :

Is there a part number to replace the 012727-000 Emergency Tool used on the discontinued Falcon M Series lock?

Resolution: There is no direct replacement for the 012727-000. :

Can a "L" Series lock less trim one side be used on a Hurricane listed door and still meet the rating?

Resolution: Hurricane listings don’t include function numbers and do not specifically address trim so omitting trim one side will be acceptable. :

Are the mounting posts removable on the Dexter C2000?

Resolution: The mounting posts on the C2000 may be removed if desired due to door prep, however it is not recommended. The posts help prevent chassis rotation on high use doors.: