Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Will a Falcon D100 deadbolt with IC core fit on a 1 3/8" door?

Resolution: The standard door range for the Falcon D100 and D200 series deadbolts with IC core is 1 5/8" - 2 1/4". Both lock series can be ordered for 1 3/8" thick doors by specifying DT 1 3/8"&nbs...:

Do 8200 push plate have beveled edges?

Resolution: 8200 plates are manufactured to remove sharp edges. Any additional beveling is not available as either a standard option or through engineering specials. :

How do I get full size or small format interchangeable core tailpieces for ALX locks?

Resolution: Complete LockThe corresponding tailpiece will be provided for the core type orderedParts OnlyN523-127 for FSIC and N523-091 for SFIC - EXCEPT ALX70 FUNCTIONS47269168 for FSIC and 47269620 for SFIC ...:

Is the LM9325 available with escutcheon trim?

Resolution: As of 2018, the LM9325 is available with escutcheon trim. The escutcheon trim is attached to the door with surface mount screws.:

Will a Schlage small format interchangeable core fit into competitor lock prep?

Resolution: Small format cores are the same dimensions across the industry. A Schlage SFIC will fit into any competitor lock if it is also prepped for small format interchangeable core. :

What is a Falcon standard A cam?

Resolution: Some Falcon exit device literature references a Falcon standard "A" cam. This is another designation for the straight cam. Part Numbers09897-000-00 - for standard (Non-IC) cylinder...:

Is there a drill template sent with the XL12-482 trim for the inside thumbturn?

Resolution: The drill template sent with all SL1/SK1 for use on inside thumbturn can be seen here. :

Can I use a L9000 Gen1 or Gen2 sectional indicator with hospital push pull paddles?

Resolution: :

Are extension rods available for the Falcon 20 series vertical rod device?

Resolution: No, extension rods are not available for the 20 series. For doors over 7', a different device series must be selected.:

What do the Von Duprin electric strike dual switches monitor?

Resolution: DS (dual switch) is an option for the 6100 and 6200 series Von Duprin electric strikes. One switch monitors whether the strike lip (keeper) is locked or unlocked. The other switch monit...: